How to Change the Batteries in a WSPER Panic Button Device
Panic buttons are essential safety devices that provide peace of mind in emergencies. The WSPER panic button is designed for easy use, but like any electronic device, it requires regular maintenance, including battery changes. This guide will walk you through the steps to change the batteries in your WSPER panic button device.
## Tools and Materials Needed
- New batteries (2 - AA BATTERIES *DO NOT USE RECHAREGABLE BATTIERIES AS IT WILL DAMAGE THE DEVICE)
- Small Phillips screwdriver ( PH0 (Philips #0) screwdriver )
- White sheet of paper
- small piece of scotch tape
## How to
- Remove the rear cover by using a PH#000 (1.5mm Diameter) Phillips screwdriver. If you do not see the screws they might be covered by mounting Velcro.
- Remove screws from the cover and secure with scotch tape. Separate the rear cover from the main unit. Make sure to do this on top of the white paper as the screws are tiny and hard to find if they are misplaced.
- Remove old batteries and Insert two(2) Non-rechargeable Alkaline AA batteries. (Recommended brands: Energizer or Duracell)
- Place the rear cover back and ensure that the screw is securely tightened
- Mount the button
After batteries are changed the device will send a status alert and you and you team will receive a sms that the device has checked in and is now being monitored 24/7
## LED LIGHT STATUS
## Conclusion
Changing the batteries in your WSPER panic button device is a simple yet essential task that ensures your safety device remains functional. Regular maintenance, including battery changes, will help you stay prepared for emergencies. You will receive SMS alert as soon as the batteries get low for each device.
If you encounter any issues during the battery change or if the device does not function after replacing the batteries, you can submit a help ticket here,
Need more help?